74
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Containment Testing of Laboratory Hoods in the As-Used Condition

Pages 209-216 | Published online: 30 Nov 2010
 

Airborne contaminants generated inside laboratory fume hoods during use leak into the breathing zone of the user. Concentration of the leakage is unknown and variable depending on laboratory design, work practices, arrangement of internal apparatus, face velocity, and sash height. Surrogate tracer gas tests have been developed using sulfur hexafluoride (SF6) and a manikin to estimate leakage. This study presents results of hood leakage tests using SF6 with a manikin and then a live operator performing a phenol:chloroform (P:C) extraction. Four hoods were tested in each of three institutions during normal work hours with the lab occupied. The purpose of the study was to determine leakage concentrations for the SF6-manikin with effects of sash height, hood contents as found and after being cleaned out, face velocity, and the actual P:C and SF6 exposure concentrations of the user during work. Results indicate P:C was not detectable in the breathing zone of the 12 operators (< 0.1 ppm) at their selected operating sash heights (7 to 15 inches). Simultaneous SF6 concentrations were also minimal (average 0.06 ppm). Average leakage was 0.02 percent for SF6 and less than 2 percent based on chloroform concentrations measured in the breathing zone of the operator and inside the hood. SF6 percent leakage was greater when sash height was above the breathing zone of the manikin (average 2.09 percent) and lower leakage (average 0.02 percent) when below the breathing zone (26 inches or less). Average face velocity did not appear to be a predictor of average hood leakage. Cleaning out the hoods did not reduce leakage in most tests. The data from this study shows that when providing training on proper work practices for lab hood use, lowering the sash should be stressed as being the major factor in reducing hood leakage.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.